Vauxhall Corsa Brodit ProClip Brackets can be defined as the easy fit mounting solutions for all your problems related to the portability of your iPod. With this accessory you don’t have to be worried about the safety of your iPod. It has a specific design for your Vauxhall Corsa and integrated look with your dashboard.

To install the Vauxhall Corsa Brodit ProClip Brackets push its upper part in the gap between the between the clock and the surrounding panel. Try to push it with a little curve. Now widen the gap between the panel surrounding the air vents and the control panel with a gap opener. After this press the lower part of the ProClip into the gap. The Vauxhall Corsa Brodit ProClip Brackets is fixed in your Vauxhall Corsa.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our Vauxhall Corsa Brodit ProClip Brackets

It is very sad, if you own a BMW and cannot carry your portable music player in your car. To carry your iPod or any other portable music player, you need to install Brodit ProClip Bracket in your BMW car. BMW 1 Series Brodit ProClip Brackets is designed specifically for your BMW 1 series for safety and easy access to your iPod, while driving.

The installation of this ProClip bracket does not damage the interiors of your car. The first step to install the ProClip bracket is to remove the adhesive tape covers on it and place the ProClip over the edge of the console. Push the ProClip on the left side, so the grooved edge clips under the console. Press the ProClip forward, so it properly hooks to the console. BMW 1 Brodit ProClip bracket is installed to your car.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our BMW 1 Series Brodit ProClip Brackets

Often, when you carry your portable music player in your car, it slides off from the car dashboard. iPod and other portable music players are very fragile and they easily get damaged by the fall from the dashboard. The other problem with these accessories is that it is very difficult to operate these accessories, while driving the car. Alfa Romeo Brera ProClip bracket is exclusively designed for your Alfa Romeo, provides you with the robust mounting solution for all these problems.

To install the ProClip bracket, first widen the gap between the control panel and the surrounding frame with the help of gap opener. Remove the adhesive tape over the ProClip and press the angled edge on the right part into the gap above the gap opener. Flip the ProClip and hook it behind the control panel. Press ProClip to the left side so the grooved edge hooks into the gap above the gap opener. In the end pull out the gap opener and the ProClip is installed in your Alfa Romeo Brera.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our Alfa Romeo Brera Brodit ProClip Brackets

Subaru Legacy Brodit ProClip Brackets is a solution for all your problems relating to the portability of your iPod and other portable devices. This Brodit ProClip bracket is made for your Subaru legacy car according to its need. This bracket is very durable because it is made of the high quality ABS plastic. This bracket is very difficult to break and finished in stylish black.

It takes only some seconds to install this ProClip in your Subaru Legacy car. Widen the gap between the frame surrounding the stereo and the control panel with the gap opener. Remove the adhesive tape on the ProClip Bracket and push the right part of it into the gap under the gap opener. Pull your gap opener out of the gap and clip the ProClip into the frame surrounding the control panel and dashboard. ProClip is fixed in your Subaru ProClip bracket.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our Subaru Legacy Brodit ProClip Brackets

It always remains a difficulty to protect your iPod from the dashboard while driving the car. To solve this problem various types of Brodit ProClip Bracket are available in the market. Ssang Yong Kyron Brodit ProClip bracket is a ProClip bracket specially made for the Ssang Yong car. If your iPod is attached to this accessory, it becomes easy to operate your iPod, because your iPod always remains close to your hands.

Damage free installation is another advantage of this Brodit ProClip bracket. First step to install this accessory is to widen the gap between frame surrounding the control panel and the control panel with the gap opener. Remove the adhesive cover and hook the grooved edge of the right part over the frame surrounding the control panel. Push it on the left side so the left part of the ProClip hooks into the gap between the gap openers. Now you can pull your gap opener out of the gap and your Brodit ProClip is placed in your Ssang Yong Kyron car.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our Ssang Yong Kyron Brodit ProClip Brackets

Do you wish to carry your iPod or other portable media player in your Smart Roadster car? Then, Smart Roadster Brodit ProClip Bracket could be the right accessory for you. All it does is, to keep your iPod in one place so the dashboard cannot damage your iPod. Your iPod would also be placed in a convenient place to operate it.

The installation of this accessory is effortless and damage free. First peel both adhesive tape covers on the ProClip off and clip the upper edge of it over the panel edge by the windshield. Now press the ProClip downwards, so the angled lower edge hooks under the panel. Now press both ends of the ProClip so, the adhesive tape attaches to the panel.The ProClip bracket is attached to your car.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our Smart Roadster Brodit ProClip Bracket

Saab 9-5 is a very stylish car and it can be made more impressionable if you carry your iPod in your Saab 9-5. Saab 9-5 Brodit ProClip Bracket makes it easy to carry your iPod in your car. Saab 9-5 Brodit ProClip bracket with its car specific design gives you a convenient access to your car.

Installation of this accessory is very easy and damage free. First remove the adhesive covers on the ProClip Bracket and pull out the rubber. After this clip the angled edge on the ProClip behind the edge and push it forward. Push this angled edge until it hooks behind the edge, by the windshield. Now press the ProClip further so the adhesive tape is attached to the car properly. The Brodit ProClip Brackets is attached to your Saab 9-5.

Purchasing an iPod from our website would be ideal. You can go ahead and buy ourSaab 9-5 Brodit ProClip Brackets

The dashboard while driving often damages the iPod and other portable music players. This is the main reason, because of which most of the people do not like to carry your iPod in their car. But, now there is a solution for this problem. If you are driving Rover city car, then Rover City Rover Brodit ProClip Brackets could be the right solution for you.

The installation of this proclip can be done in a few seconds, without damaging your car. Remove the screw under the climate control panel. Push the gap opener into the gap to widen it and remove the cover of the adhesive tape on the ProClip. Now push the proclip bracket into the gap under the gap opener and pull the gap opener out. Press the lower part of the proclip in the hole and screw it with the removed screw. The proclip bracket is placed in your Rover city.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our Rover City Rover Brodit ProClip Brackets

With this ProClip bracket in your car, you don’t have to think again in carrying your iPod again in your Renault Avantime. It is made of the high quality material, which is very durable. The Renault Avantime Brodit ProClip Bracket is made specifically to your Renault Avantime. It makes it safe to carry your iPod and also gives an easy access to your iPod in the car.

To install the Renault Avantime Brodit ProClip Bracket, you have to first peel off the adhesive tape covers on the ProClip. Now, push the lower part of the ProClip Bracket into the gap between the control panel and the stereo panel. Clip the ProClip into the gap between the dashboard and the surrounding frame. Push the ProClip forward until it goes into the gap.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our Renault Avantime Brodit ProClip Bracket

Passive cradle is a must for any car to use iPod or any other portable music system. Passive cradle on the car dashboard makes it safe and convenient to operate your iPod. It is easy to reach the iPod with the passive cradle, because it twists and turns around to give a perfect position for the iPod to insert and remove it. This model is compatible with iPod nano only.

To install the passive cradle for iPod nano screw in the center of the holder should be removed. Place it at the desired position and screw the attaching part into place. The holder is fixed in its place. You should place the passive cradle on the damage free mounting bracket to avoid damaging the interior of the car.

Purchasing an iPod from our website would be ideal. You can go ahead and buy our Passive Cradle for iPod nano